In this guide we have mentioned the complete details to download and install the Android 11 Beta ROM for Xiaomi Mi 10/Mi 10 Pro. Xiaomi has recently released the Android 11 beta for Mi 10 and Mi 10 Pro, Less then a week ago Xiaomi promised to release Android 11 Beta for the Mi 10 and Mi 10 Pro and now it seems the company has kept it promised. If you are eagerly waiting to see Android 11 on your device then you must have some good knowledge of manual firmware installation as this update is not going to be live via OTA. Secondly since it is a beta update so don’t expect the stability level of a final firmware and the ROM is based on AOSP but not the MIUI ROM.
The Mi 10 Pro Android 11 beta is a .tgz so you must first met a few pre-requisites like installing USB Drivers on your computer, unlocking bootloader and then flashing the ROM via Mi Flash Tool. If you are good to go, just keep reading the guide carefully.
Download Android 11 beta 1 .tgz ROM for Xiaomi Mi 10/Pro
Download the ROM according to the device you own as separate files are mentioned for each.
Android 11 beta ROM link for Xiaomi Mi 10:
Android 11 beta ROM link for Xiaomi Mi 10 Pro:
Process to install the ROM on your device
Download MiFlash tool for Windows. Install it on your PC.
Now get ready we are going to flash the ROM by following the instructions below!
Step 1: Reboot your phone into Download mode, to do so, power off your device completely and then press and hold the Power + Volume Down buttons together for 5 seconds.
Step 2: Now its the time to connect your device to the computer using the working USB cable.
Step 3: Download the Fastboot ROM .tgz file you downloaded above and extract it. Remember the address of extracted folder as you will need to paste the address into MiFlash Tool later.
Step 4: Now click on the MiFlash Tool.exe to run the tool and paste earlier copied address of the file in the address bar. Or browse to the file destination.
Step 5: Click on “Refresh” within MiFlash and the app should automatically recognize your device.
Step 6: Click Run to start the installation process.
You may also like:
You can watch the progress bar within MiFlash tool will turn green, which indicates that the ROM was successfully installed. Once the installation is completed just it will reboot your device automatically but this time with latest firmware. Hurrah!